.png)
1. Caulk
Fill small gaps and seams with caulk.
1. Wipe area with a clean cloth. Have a few paper towels read for clean up.
2. Using a applicator helps keep the mess down. Wipe excess caulk off applicator after every pass.
3. Apply caulk to area and wipe excess off quickly. Caulk sets up fast. let first coat completely set before reapplying touch up coats.
2. Paint
If you happen to a have a toilet that is not the traditional white, you can paint the OARYsystem to match.
Polypropylene is paintable with some prep.
-
Sanding (220) grit
-
Adhesion primer
-
"Plastics" approved spray paint.
1. lay out all pieces to be painted on lint free cloth or newspaper. Tape all Draft angles and Q-tip all inner connections with a cooking oil or lubricant.
2. Sand (220 grit): Sand each piece and wipe down with a lint free cloth. Space out pieces to be painted. Setting each piece on spacers helps with runoff.
3. Adhesion primer:
spray each piece with a tack coat, then go back and spray a second coat. let completely dry. Runs can be sanded (220 grit) and repainted.
4. Plastics approved spray paint:
3. Cord Covers
Cord covers are a great way to hide electrical wires. here we have a few options from complete systems to simple and economic.
-
Extension Cord covers options (available Quick Shop).
1. Map out route you want the cord to take. Measure, cut and install lengths one at a time.
15. Replace or reinstall toilet seat.
15. Replace or reinstall toilet seat.
15. Replace or reinstall toilet seat.
I'm a paragraph. Click here to add your own text and edit me. It's easy.
* Professional installation may be required.
4. Test fit both pieces.
4. Test fit both pieces.
4. Test fit both pieces.
4. Test fit both pieces.
Extension Cord Cover system
I'm a paragraph. Click here to add your own text and edit me. It's easy.
4. Test fit both pieces.
4. Test fit both pieces.
4. Test fit both pieces.
4. Test fit both pieces.
Economy extension Cord Cover
I'm a paragraph. Click here to add your own text and edit me. It's easy.
4. Test fit both pieces.
4. Test fit both pieces.
4. Test fit both pieces.
4. Test fit both pieces.
Installation Complete
Great job! The rest is just turning the water back on and clean up. Thank You and Enjoy your new OARYsystem.