.png)
4. Electronics/Power*
This is your Project Page. It's a great opportunity to help visitors understand the context and background of your latest work. Double click on the text box to start editing your content and make sure to add all the relevant details you want to share.
* Some electrical installations may require a professional.
1. Electronics control unit
The OARYsystem has an Electronics control unit (ECU). The AC power and Motion sensor are connected to it. It controls the speed of the motor and the On and Off functions.
1. Orient the ECU onto motor housing with the speed control knob up. Mount to Motor using the hook and loop fasteners.
2.
3. Remove peel and stick protector and stick ECU to motor housing.
4. The speed of the motor is factory set at 3/4 speed. If you want it more or less, it can be done here
End of Motion sensor installation.
Next step:
2. Motion sensor installation.
The OARYsystem is fully automatic with the help of a motion sensor.
1. Mount the motion sensor on the side of the cabinet. Low and facing the toilet. We want your foot to activate the sensor. Choose a route that wires can be easily routed and be out of the way.
2. In this cabinet, we can run the wires through the lower drawer section and up into the main cabinet to the motor/ECU. Using a 1/4" drill bit. Drill the holes and route the wires.
3. Mount the motion sensor and connect the wires. Connect wires to ECU.
TIP: You can use zip ties to bundle up excess wire and pieces of sticky tape to hold wires into place.
The 12V AC power adaptor powers the ECU and all the other components of the OARYsystem.
1. Plug the 12V AC adaptor into the ECU.
2. Plug the 12V AC adaptor into a 115V AC outlet.
The OARYsystem will need to be connected to a 115v AC outlet. Most cabinets don't have an AC outlet installed inside the cabinet but there are several options. ​
-
AC outlet dropdown Kit* (available Quick Shop).
-
AC outlet extension Kit* (available Quick Shop).
-
-
.jpg)
* Professional installation may be required.
AC outlet Dropdown kit*
An AC outlet Dropdown kit is an excellent option if you have a local power source (light switch or outlet) that can be "Dropped down" into the cabinet.
Youtube video Link here.
* Professional installation may be required.
1. Find out if there is an outlet that you are able to dropdown into the cabinet. Open packaging for Dropdown outlet and get familiar with its installation.
2. Measure off and mark location of new Dropdown outlet. Drill a 1" hole through the cabinet and drywall into the wall to access wiring. Turn off power to outlet that we are working on.
3. Remove face plate from top outlet and pull out receptacle/switch. Drill or knockout hole in bottom of outlet. Fish a string down through to the Dropdown outlet.
4. Pull new wiring for Dropdown outlet. Mount base plate for Dropdown outlet. Strip wires and connect to unswitched wires in top outlet. Connect wiring in Dropdown outlet, install into base plate and attach face plate.
4. install top outlet and face plate. Turn on power to outlet and test.
AC outlet extension kit*
An AC outlet extension kit lets you run power wires from a remote source (switch or outlet), outside a wall to the desired location without cutting into the drywall.
* Professional installation may be required.
1. Plug the 12V AC adaptor into the ECU.
1. Plug the 12V AC adaptor into the ECU.
1. Plug the 12V AC adaptor into the ECU.